where can i find it, and how would i apply it on the mask… thanks for your time
I usually just buy black panty hose at walmart. You can get them for 20 or 30 cents, too. I normally use them for hockey masks, but you could use them for Myers as well.
You’d have to turn the mask inside out first. Then, cut small square of the panty hose,\ (smaller than the eyes themselves) Apply glue (preferably hot glue, it dries quicker) around the eyes of the mask (not too close to the edge) then stretch the strip of panty hose over the eye. Make sure its attached all the way around and that you’ve stretched it equal amounts on both sides.
The first few masks I had to black out eyes on I used netting from cheap Halloween masks I had laying around and applied it with tacky glue. It’s a real pain in the ass though, trying to hold it down and apply the glue through the bottom of the mask. The black pantyhose approach is much easier and if you want to wear the mask on Halloween (when you won’t be able to see through the blacked eyes) it’s easier to take it out.
thanks for the help guys, so you are not able to see thru the material they usually use ? that sucks.
No, I mean at night. It’s hard to see out of the mesh material at night. Some mask makers will apply the meshing for you. My HSS H4 already had it applied and I actually can hardly see out of it in daylight. 
lol, ok, it makes sense not to be able to see at night, thanks for the info guys
I always use the panti hose method.